[ad_1]

When assembling a computer, the choice of cooling for the central processor is often given little attention.

Having spent the allocated budget on the main components – the processor, video card, memory and motherboard, the cooling for the processor is chosen according to the residual principle. This is often the wrong approach, which can lead to various problems.

Currently, coolers and LSS are mainly used – liquid cooling systems or, in common people, dropsy, although there is no water there. Cooling with liquid nitrogen has gained some distribution, but this is an extremely expensive pleasure.

We have compiled for you the Top best coolers and liquid cooling systems for processors and motherboards.

The best liquid cooling systems

Deepcool Castle 240 RGB V2

Deepcool Castle 240 RGB V2

The manufacturer calls this model a gaming one, but for hot processors it is better to choose a cooling system with a large number of fans – this one will not cope with the load.

The reviews note high performance and quiet operation. So, Castle 240 RGB V2 allows the AMD Ryzen 3700X processor to be overclocked to 4300+ MHz with all cores, and the chipset temperature under load stays around 86 degrees. With such indicators, the “dropsy” almost does not make noise. RGB lighting looks beautiful and works correctly with all motherboards. A feature of this model is the stabilization of pressure in the tubes. Among the shortcomings are incomprehensible instructions and difficulties during installation (relevant for those who will have this first CO).

ASUS ROG RYUJIN 360

ASUS ROG RYUJIN 360

There is no doubt that after placing all the components in the case, you will remember it only for the sake of cleaning it from dust. The water cooling system from ASUS does not require much maintenance, it will work stably even after several years of operation. But you will have to pay a considerable amount for this – now it is one of the most expensive copies of its kind. It is not surprising that the system is mainly used by the owners of the most powerful processors, which are also subject to overclocking.

To install the entire structure will need a lot of space. The fact is that the aluminum radiator itself turned out to be quite large. Water moves from it to the second important element, which is a block of three fans. Such a number of them were needed to reduce the noise level. As a result, even spinning at maximum speed does not make the structure loud – measurement in close proximity shows only 29.7 dB. In total, the range of 450-2000 rpm is available to the user. As for the socket, the product supports a variety of processor sockets – from AM4 to LGA 2011-3.

Cooler Master Liquid ML240R RGB

Cooler Master Liquid ML240R RGB

Those who like to have a rainbow in their case will definitely like the Cooler Master Master Liquid ML240R RGB. For specially, there are 3 types of fans with different speeds, allowing you to combine components for the best effect. The company has learned from the mistakes of the past and the model in the latest revisions flows only in the case of a disregard and lack of care in terms of cleaning, but it is better to buy a filter altogether.

According to customer reviews, there is no difficulty in installing here, which should also be thrown into the piggy bank of pluses. A nice addition would be a tube of thermal paste in the kit. The fastener parts of the turntables are completely rubber and are separately screwed to the body, creating a minimum background noise.

The best boxed coolers

Intel S-1156 Original E97379

Intel S-1156 Original E97379

It is this cooler that is usually included with cheap Intel processors. You should not expect impressive opportunities from him. If you got a gaming chip with an unlocked multiplier, then this is definitely not your choice. If the processor does not tend to get very hot, then such a cooler will definitely fit. It is equipped with a small aluminum heatsink, so you don’t need much space in the case. As for the fan, it rotates at a speed of 1200 to 2800 rpm. The noise level will be noticeable – at maximum speed it can reach 38 dB.

The manufacturer claims that this cooling system is ready to dissipate 80 watts of power. This once again confirms the fact that the cooler is not designed to be installed on an overclocked processor. To connect to the motherboard, a 4-pin PWM connector is used here. As for the socket, only LGA 1150, LGA 1151 (including the second version), LGA 1155 and LGA 1156 are among the supported ones. The warranty period for this product does not exceed six months.

Deepcool ARCHER BIG PRO

Deepcool ARCHER BIG PRO

As an inexpensive box, we recommend Deepcool ARCHER BIGPRO. A simple and successful design with support for the new AM4 socket from AMD allowed the cooler to establish itself as a folk cooler on the market. Installation takes about 30 seconds with straight arms. The copper core greatly improves heat absorption, resulting in a maximum power dissipation of 125W.

A good bonus is the multidirectional fins of the radiator, due to which the heat is evenly distributed over the entire area of ​​the radiator. The spinner is capable of accelerating up to 2000 rpm, pleasing with a low noise level both at the top and at minimum speed. For the money – definitely top.

CoolerMaster I70C

The best tower coolers

Noctua NH-D15

Noctua NH-D15 cooler

Two 140 mm fans are responsible for cooling here. Everything from packaging and build quality to cooling and support is top notch. The manufacturer gives a guarantee for 6 years. Technical support works quickly and competently: upon request, it sends fasteners for socket 1356 directly from Austria, as well as broken body elements, if you provide evidence of a breakdown – in the reviews, the user said that during the first installation he squeezed the bolt and broke the frame, and the manufacturer sent a new one for free .

This is a large cooling system, so consider this when choosing: in our top you will find more compact options. Users write that the cooler is able to “freeze” the processor, it removes heat so well. This is one of the best COs, which is suitable for both powerful i5 and i7 processors, as well as for running models from AMD.

be quiet! DARKROCK PRO 4

be quiet! DARKROCK PRO 4

2 fans and 7 heatpipes deliver a killer 250W of power dissipation. He sets records and competes with dropsies, showing as close as possible, and even surpassing the results of the LSS. Options rich, match the price category. A heatsink, turntables, mounting brackets, instructions, a screwdriver, thermal paste and mounts for Intel and AMD – all this you will find inside the package. The case is completely black, there is no hint of backlighting or other excesses.

Compared to the 3rd generation, the Quartet has become much easier to install without breaking fingers and the motherboard, Ryzen owners will be especially happy. Each module consists of 42 aluminum plates, the distance between which is only 2 mm, which is the standard. According to customer reviews, this is a great device, but the price and weight of almost 1 kg greatly narrow the circle of fans of the model.

PCcooler GI-X6B

PCcooler GI-X6B

Beauty, silence, low temperatures – these are just a small list of the advantages of this model. There are already two fans here, both with a diameter of 120 mm. This is enough to dissipate 160 W of heat, since 5 heat pipes can handle it at once. The only problem is the tight brace.

The color of the blades, heat pipes and lighting caused the price increase, if beauty does not bother you, you can find an alternative. In stress tests on Ryzen 1800x, the temperature slowly rises to 85 degrees over half an hour, after which it does not rise at all. In general, we recommend for connoisseurs and aesthetes.

Leave a Reply